|by | | ||
|Products » Media- Solv,UV,Latex (Banner) » UltraFlex Strip Mesh Pro - LTX
UltraFlex Strip Mesh Pro - LTX
Strip Mesh Pro LTX is a 9oz mesh with backer that can be easily removed after printing. The specially designed backer creates an air-tight print surface that prevents ink spray through and allows vacuum equipped printers to hold material flat during printing. The backer is specifically formulated to work with Latex, solvent, eco solvent, and UV printers.
25% air-flow through
Fence mesh graphics
Boulevard banners in high wind areas.
- 54x164ft ... #UF SMPLTX137050
- 60x164ft ... #UF SMPLTX152050
- 72x164ft ... #UF SMPLTX183050
- 98x164ft ... #UF SMPLTX203050
- 104x164ft ... #UF SMPLTX264050
ULTRAFLEX SYSTEMS INC.
|CONDITION OF USE AND STOCKING
Shelf Life: UltraFlex Strip Mesh Pro - LTX has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons UltraFlex Strip Mesh Pro - LTX should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.