|by | | ||
|Products » Display and Exhibit (Banner Stands) » Expolinc Panel Base
Expolinc Panel Base
The Expolinc Panel Base is a floor-standing double-sided display system that keeps all rigid board materials up to 3/4 inches in a firm grip. The panel stands straight and stable after fast and easy installation.
Panel Base 2x80: Pair of 3 inch Stabilizing Feet
Panel Base 400: 15.75 inch Stabilizing Foot
Panel Base 610: 24 inch Stabilizing Foot
Panel Base 1220: 48 inch Stabilizing Foot
Recommended maximum panel height approximately 70.8 inches depending on the material.
Note that 1 inch at the bottom becomes invisible in the system L-extrusion.
The Panel Base is delivered in a cardboard box.
- 0in ... #DISEX 6401- Base 2x80
- 0in ... #DISEX 6404- Base 400
- 0in ... #DISEX 6406- Base 610
- 0in ... #DISEX 6412- Base 1220
|CONDITION OF USE AND STOCKING
Shelf Life: Expolinc Panel Base has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Expolinc Panel Base should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.