|by | | ||
|Products » Equipment (Cutters - Board Cutters) » Foster-Keencut Javelin Series 2- 124 in.
Foster-Keencut Javelin Series 2- 124 in.
The Javelin Series 2 is an essential tool for butting joints on sectional panels and POP systems. Factory laser truing guarantees the accuracy to within .008" over the full length of the cut. It is designed for use as a portable unit or for an even more precise cut, add the optional Lift & Hold Mechanisim to your work bench allowing you to turn your existing work surface into a precision cutting station. Combine the Javelin Series 2 with the Big Bench Xtra and it creates a complete precision cutting table.
The Javelin Series 2 is equipped with lift stands to support the unit between cuts and enable easy placement of work.
The Javelin Series 2 features a new, high performance cutting head design that relies on strong Graphik blades with a cutting depth up to 13mm. These unique reversible blades cater to both left and right-handed operators and cut materials up to ½". This new head can also accommodate an easy-to-change 45mm textile blade holder, as well as a vertical medium duty blade holder with a cutting depth up to 3⁄8" (10mm).
Lift & Hold Mechanism:
Designed to fit the Javelin Series 2 and Max precision cutting bars, the Lift & Hold Mechanism is affixed to the table by screws, ultimately securing the cutter bar in place to prevent shifting while cutting. The device allows operators to easily lift the cutter bar, slide the material in place and clamp down to make precision cuts.
• Vertical Graphik blade holder
• 1 textile blade holder with 45mm cutting wheel
• 25 Graphik blades
• Vertical medium-duty blade holder
• 100 Medium-duty blades
|CONDITION OF USE AND STOCKING
Shelf Life: Foster-Keencut Javelin Series 2- 124 in. has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Foster-Keencut Javelin Series 2- 124 in. should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.