Home   Company   Products   Support   Contact Us   Sign In
Current Promotions   Products Home   Sale Rack   Applications   Request A Quote   Product Inquiry
by Product | Mfg | Application
Product Search
Contact Us

Sonoma Graphic Products
961 Stockton Ave.
San Jose, CA 95110
USA

Phone: (800) 250-4252
(408) 294-2072
Fax:(408) 294-2045

Maps & Directions:
» Portland Location
» San Jose Location
» Seattle Location
 
More (Cutters - Board Cutters)
- Big Bench 100in
- Big Bench 120in
- Big Bench 40in
- Big Bench 60in
- Big Bench 80in
- Fletcher F-3100s Board Cutter
- Foster-Keencut Big Bench XTRA
- Foster-Keencut Big Bench XTRA
- Foster-Keencut Big Bench XTRA
- Foster-Keencut Big Bench XTRA
- Foster-Keencut Big Bench XTRA
- Foster-Keencut Evolution 2 Pre
- Foster-Keencut Evolution 2 Wor
- Foster-Keencut Excalibur & Ste
- Foster-Keencut Excalibur 1000X
- Foster-Keencut Excalibur 5000
- Foster-Keencut Excalibur Serie
- Foster-Keencut Javelin Series
- Foster-Keencut Javelin Series
- Foster-Keencut Javelin Series
- Foster-Keencut Javelin Series
- Foster-Keencut Javelin Series
- Foster-Keencut Javelin Series
- Foster-Keencut Proteus Workben
- Foster-Keencut Simplex
- Foster-Keencut SteelTrak Board
- Foster-Keencut Verdi Twin Cutt
- Javelin 100in
- Javelin 120in
- Javelin 40in
- Javelin 60in
- Javelin 80in
- Practik 100in
- Practik 120in
- Practik 40in
- Practik 60in
- Practik 80in
Products » Equipment (Cutters - Board Cutters) » Foster-Keencut Sabre 2
Foster-Keencut Sabre 2

Product Overview:
Designed to cut a wide range of sheet materials, the Sabre Series 2 offers a standard of straight, square and clean cutting. The new cutting head features a reversible Graphix blade making the Sabre Series 2 ideal for left-handed and right-handed operators. The blade locking thumb screw adds safety and convenience for blade depth adjustment.
The Sabre Series 2 is designed for use on a bench or attached to the optional stand. The innovative hinge and lift arm mechanism makes it possible to cut materials, which are longer than the length of the cutter.
It also accepts materials of varying thickness without affecting either the line of angle of cut. The extruded and silver anodized aluminum base incorporates a narrow groove to accept the blade tip when cutting.
A full length silicon rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.

Properties:
Cuts up to 13mm PVC Foamboard, Pop-up
Banners, Foam Centered Board, Corrugated Plastics, Fabric & Textiles, Acrylic, Banner, and much more…

Manufacturer:
Foster-Keencut Manufacturing

Product Datasheet:
..... 772_datasheet.pdf


CONDITION OF USE AND STOCKING
Shelf Life: Foster-Keencut Sabre 2 has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Foster-Keencut Sabre 2 should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.
Home   Company   Products   Support   Contact Us   Sale Rack   Site Map   Privacy   Login
Copyright © 2017, Sonoma Graphic Products.   Website Design by Xillent Studios.
All Rights Reserved.