|by | | ||
|Products » Equipment (Cutters - Trimmers) » Foster-Keencut Rototrim PowerTech
Foster-Keencut Rototrim PowerTech
The PowerTech series of cutters is the top of the line solid metal cutter that combines the lightness of touch with industrial strength cutting power. The PowerTech will slice effortless through almost any flexible sheet material up to 4mm thick. These versatile cutters are equally at home with thin films and foils due to the unique self-adjusting triple roller cutting head.
Chromed 1-1/2" square steel guide rail and all metal construction eliminates distortion.
Self-sharpening Sheffield tungsten steel cutting wheel and counterblade.
Two way cutting option by removing cover plate.
Transparent clamp strip and rubber gripper for firm positive clamping action.
A 10-1/2" rule and squaring arm is factory installed onto an all-metal base.
Extruded aluminum satin finish aluminum baseboard with parallel indents is strong and warp-free.
Each PowerTech is supplied with a comprehensive operating and servicing manual.
- 61in ... #EQFOS 60420
- 73in ... #EQFOS 60430
- 85in ... #EQFOS 60440
- 99in ... #EQFOS 60450
|CONDITION OF USE AND STOCKING
Shelf Life: Foster-Keencut Rototrim PowerTech has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Foster-Keencut Rototrim PowerTech should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.