|
|
| Products » Display and Exhibit (Banner Stands) » Expolinc Pole System |
|
Expolinc Pole System
The Pole System is the perfect system when you want to display your message up high. Ideal when you want to be seen in the middle of a room or in places where you want to see what is going on behind the graphics. The panel measurements are flexible both in height and width and you can make the system double sided. For a complete pole system you must order TWO different part numbers. First, you will need to order part #DISEX 1601 which includes the pole, canvas bag and hardware. Second, you will need to order 2 universal panel profiles specific to the width of your graphic (for top and bottom). Please see "Accessories" under Display and Exhibit for the universal profile listing. (For 2 sided pole systems you will need two universal panel profile sets, one for each side.)
Specifications-
Function- Single sided / Double-sided
Width- (inches) - 21.62, 27.5, 33.43, 39.32
Height- (inches) - 39.375 to 94.5
Weight- (lbs) 6.5
Color Silver
- 0in ... #DISEX 1601
Neschen USA
 ..... 603_datasheet.pdf
|
 |
CONDITION OF USE AND STOCKING
Shelf Life: Expolinc Pole System has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Expolinc Pole System should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them. |
|
More (Banner Stands) 
Zoom Out
Zoom In
