|by | | ||
|Products » Media- Solv,UV,Latex (Self Adhesive Vinyl) » Arlon SLX Cast Wrap Film
Arlon SLX Cast Wrap Film
SLX™ Cast Wrap is a 2-mil (50 micron) premium gloss white repositionable cast film with FLITE Technology™. Designed for full and partial vehicle and fleet applications, the film allows for a fast install, conforming around rivets, complex curves and deep channels with ease. FLITE Technology is a lite contact system allowing graphics to float over a substrate until firm pressure is applied. It guarantees the fastest installation while ensuring long-term bond and clean removability. SLX Cast Wrap has a tinted, permanent pressure-sensitive adhesive providing excellent opacity. The low profile, air egress liner aids with easy installation, resulting in a smooth finish. Arlon strongly recommends the use of Series 3270 Overlaminate when using SLX Cast Wrap for optimum performance of the film. SLX Cast Wrap is rated for outdoor durability up to 7 years (unprinted). Printed durability is dependent on the ink system used.
For Arlon recommended over laminate please see:
Arlon Series 3270 Cast Laminate.
APPLICATIONS & FEATURES
• Ideal for full or partial vehicle and fleet wraps.
• Fast, easy application for the novice and experienced installers.
• Vibrant and reliable print quality on Eco-Solvent, Solvent, UV and Latex print systems.
• Easy liner release maintaining the integrity of the graphic.
- 30x150ft ... #AR 070X03015102-30
- 54x150ft ... #AR 070X05415102-54
- 60x150ft ... #AR 070X06015102-60
|CONDITION OF USE AND STOCKING
Shelf Life: Arlon SLX Cast Wrap Film has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Arlon SLX Cast Wrap Film should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.