| Products » Media- Solv,UV,Latex (Wallcovering) » ReTac Smooth 150 |
|
ReTac Smooth 150
ReTac Smooth is a 6 mil (150μ) printable matte white polymeric PVC fi lm with ReTac® ultra removable adhesive. The adhesive is protected by a solventless fine paper coated on both sides with PE and siliconized on the release side. This high quality, ink receptive printable vinyl was specifically developed for easy application and removal of vibrant graphics to a wide range of substrates. ReTac Smooth can be easily applied, re-positioned and removed without surface damage or loss of adhesion. ReTac® Wall is rated for surface burning characteristics of building materials according to ASTM E 84.
- 54x150ft ... #DT RTF54150-6
- 61x150ft ... #DT RTF61150-6
Drytac
 ..... 2128_datasheet.pdf
..... 2128_msds.pdf
|
 |
CONDITION OF USE AND STOCKING
Shelf Life: ReTac Smooth 150 has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons ReTac Smooth 150 should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them. |
More (Wallcovering) 
Zoom Out
Zoom In
