|by | | ||
|Products » Equipment (Cutters - Board Cutters) » Foster-Keencut Evolution 2 Work Bench
Foster-Keencut Evolution 2 Work Bench
Combine the Evolution 2 Bench with the Evolution-E2 cutter to create the ultimate precision cutting table. Now the Evolution-E2 cutter has the perfect bench.
The cutter can be easily installed onto the bench without installing the worktop first. Only one ¾” thick worktop is required to bring the top level to the Evolution-E2 cutter’s base.
Aluminum base plate for easy alignment of the Evolution-E2 mounting brackets.
Unique leg to beam fixing brackets apply incredible strength to Evolution 2 Benches. Adjustable feet allow the bench to be installed on uneven floors without compromising accuracy.
Once the Evolution-E2 is installed, only one 3/4" thick worktop is needed to bring the cutter base level to the worktop (worktop not included, 3/4" MDF or finished plywood recommended).
When not in use, the cutter bar’s swing-over capability allows it to be folded under the Evolution 2 Bench, resulting in an unobstructed workbench surface.
Works specifically with the Evolution-E2 Cutter. Fast and easy construction with necessary tools included.
EQFOS 60950 - 64" FOR ITEM 60386
EQFOS 60951 - 84" FOR ITEM 60387
EQFOS 60952 - 104" FOR ITEM 60388
EQFOS 60953 - 124" FOR ITEM 60389
EQFOS 60954 - 144" FOR ITEM 60390
|CONDITION OF USE AND STOCKING
Shelf Life: Foster-Keencut Evolution 2 Work Bench has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons Foster-Keencut Evolution 2 Work Bench should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.