|by | | ||
|Products » Liquid Laminate (Fleet, Sign and Banner) » ClearShield Wall Armor
ClearShield Wall Armor
Specifically formulated for digitally printed wallcovering applications, Clearshield Wall Armor not only offers the unbeatable protection that the ClearShield line of laminates is known for, it also has the benefit of adding a Type II certified solution for commercial applications. In addition to being compatible with latex, eco-solvent and UV curable inks, Wall Armor provides added stain and abrasion resistance, as well as fire retardancy. When a commercial application has to meet the high standards of Type II certification, Wall Armor is the clear choice.
Manual or Hand Application
Apply two coats with a short-nap roller. Allow the coating to dry completely between coats.
Automated Liquid Laminators
ClearShield can be used on most automatic flood coaters, including the StarLam 1600R Roll-to-Roll.
HVLP Spray Gun
ClearShield is easy to apply using an HVLP gravity-fed spray gun. We recommend using a 1.3 to 1.6mm tip and a psi of 45 - 55.
These wallcoverings have been tested and proven to work well with ClearShield Wall Armor.
« DreamScape Matte
« DreamScape Terralon
« Korographics Abaco Beach
« Ultraflex Wallscapes Suede
- 0in ... #MAR 360266853 - Satin 5 Gallons
- 0in ... #MAR 360259853 - Satin 1 Gallon
|CONDITION OF USE AND STOCKING
Shelf Life: ClearShield Wall Armor has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons ClearShield Wall Armor should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.