|by | | ||
|Products » Media- Inkjet Aqueous (Backlit / Window Films) » CF JetVue Perforated window vinyl w/ Solid Liner
CF JetVue Perforated window vinyl w/ Solid Liner
Sonoma Window Media One Way Vision™ films Exterior-mount window graphics for POP, retail and commercial signage and a wide variety of other applications.
JetVue is ideal for short production runs, including one-offs, for short-term applications when used outdoors. It capitalizes on the cost-effectiveness, quick turnaround and mass customization possible with inkjet printing.
Mid- and wide-format inkjet printing with aqueous pigmented and dye-based inks.
The use of an overlaminate or liquid laminate is recommended with JetVue, especially for outdoor graphics printed with dye-based inks, to increase the life of the image.
For graphics to be mounted on curved windows, a liquid laminate or an overlaminate that conforms well to curved surfaces (e.g., CurvaLam) is recommended.
Perforation pattern: approx. 50% perforated, 50% retained.
Note: Not recommended for vehicle window graphics because of the relatively short life span of aqueous inkjet inks.
8mil perforated one-way viewing window vinyl
Waterproof with pigmented inks
- 36x50ft ... #CF JVSL36
- 54x50ft ... #CF JVSL54
|CONDITION OF USE AND STOCKING
Shelf Life: CF JetVue Perforated window vinyl w/ Solid Liner has a shelf life of 12 months after receipt from Sonoma Graphic Products. Storage (new and partially used rolls): For quality reasons CF JetVue Perforated window vinyl w/ Solid Liner should be stored and converted under conditions of 35-65% relative humidity and at a temperature of 10-30°C. Storage of open rolls: When an open roll of media is not being used » remove the roll from the printer » cover the roll with a plastic bag to protect it from contaminants » if you are storing it on end, use an end plug and tape down the edge to prevent damage to the edge of the roll » do not lay sharp or heavy objects on unprotected rolls and do not stack them.